Mark,
With
the Polling Vote Center expanded in the tree view, click on Pct 1 OS. Then hold down the shift and control
keys and drag and drop the Pct 1 report precinct from the right side over to
Pct 1 TS. This should allow you
to duplicate the report precinct within the Polling vote center
category.
Cathi
-----Original
Message-----
From:
owner-support@dieboldes.com [mailto:owner-support@dieboldes.com]On Behalf Of Mark Earley
Sent: Friday, January 24, 2003 10:26
AM
To:
support@dieboldes.com
Subject: RE: AVOS/TS blended system
uploads
Nel, I
cannot get a report precinct to attach to more than one vote center within
the Polling vote center group. It does work if I make a separate counter
group called Polling TS vote centers. See attached db. This is an old db so
the password is "global". I configured the two Polling Vote Centers (OS
and TS) without the cumulative results
only check box checked.
Am I
doing something wrong?
Mark
-----Original
Message-----
From:
owner-support@dieboldes.com [mailto:owner-support@dieboldes.com]On Behalf Of Nel Finberg
Sent: Thursday, January 23, 2003 8:11
PM
To:
support@dieboldes.com
Subject: RE: AVOS/TS blended system
uploads
Mark,
you don't need a unique vote center category to configure the blended system,
just define two vote centers for every polling location, all in the
same vote center category (assuming both AccuVote-OS and AccuVote-TS units are
used for polling).
Nel
-----Original
Message-----
From:
owner-support@dieboldes.com [mailto:owner-support@dieboldes.com] On Behalf Of Mark Earley
Sent: January 23, 2003 4:31
PM
To: Support
Subject: AVOS/TS blended system
uploads
With the new ADA
requirements facing our OS customers, they will likely be knocking on our door
to purchase TS units to compliment their existing OS systems with one TS unit
in each precinct - coexisting with the OS units in a blended system.
While there are some problems with programming such a system (namely needing
to have another Vote Center category created for the TS units), these are
hurdles that can be managed (I guess they can - does anyone have thoughts
on this?). My bigger concern is handling the uploading of both TS and OS
results via modem into the GEMS server.
What are the
known issues relating to upload? I know that TS uses RAS while OS
uses regular serial com ports, thus the need for separate modem banks. Can
GEMS receive modem uploads from both OS and TS units at the same time? Has
this been tested in any kind of a medium to large scale test? Does anyone have
any experience with receiving both TS and OS modem uploads?
Thanks.
Mark
Mark
Earley
850
422-2100 - office/fax
850
322-3226 – cell