Mark,
With the
Polling Vote Center expanded in the tree view, click on Pct 1 OS. Then hold down the shift and control
keys and drag and drop the Pct 1 report precinct from the right side over to
Pct 1 TS. This should allow you to
duplicate the report precinct within the Polling vote center category.
Cathi
-----Original
Message-----
From: owner-support@dieboldes.com
[mailto:owner-support@dieboldes.com]On Behalf
Of Mark Earley
Sent: Friday, January 24, 2003
10:26 AM
To: support@dieboldes.com
Subject: RE: AVOS/TS blended
system uploads
Nel,
I cannot get a report precinct to attach to more than one vote center within
the Polling vote center group. It does work if I make a separate counter
group called Polling TS vote centers. See attached db. This is an old db so the
password is "global". I configured the two Polling Vote Centers
(OS and TS) without the cumulative results only
check box checked.
Am I
doing something wrong?
Mark
-----Original Message-----
From: owner-support@dieboldes.com
[mailto:owner-support@dieboldes.com]On Behalf
Of Nel Finberg
Sent: Thursday, January 23, 2003
8:11 PM
To: support@dieboldes.com
Subject: RE: AVOS/TS blended
system uploads
Mark, you
don't need a unique vote center category to configure the blended system, just
define two vote centers for every polling location, all in the same
vote center category (assuming both AccuVote-OS and AccuVote-TS units are used
for polling).
Nel
-----Original Message-----
From: owner-support@dieboldes.com
[mailto:owner-support@dieboldes.com] On
Behalf Of Mark Earley
Sent: January 23, 2003 4:31 PM
To: Support
Subject: AVOS/TS blended system
uploads
With the new ADA requirements facing our
OS customers, they will likely be knocking on our door to purchase TS units to
compliment their existing OS systems with one TS unit in each precinct -
coexisting with the OS units in a blended system. While there are some problems
with programming such a system (namely needing to have another Vote Center
category created for the TS units), these are hurdles that can be managed (I guess
they can - does anyone have thoughts on this?). My bigger concern is
handling the uploading of both TS and OS results via modem into the GEMS
server.
What are the known issues relating
to upload? I know that TS uses RAS while OS uses regular serial com ports,
thus the need for separate modem banks. Can GEMS receive modem uploads from
both OS and TS units at the same time? Has this been tested in any kind of a
medium to large scale test? Does anyone have any experience with receiving both
TS and OS modem uploads?
Thanks.
Mark
Mark Earley
850 422-2100 -
office/fax
850 322-3226 – cell
