RE: Voter Access Cards/Spyrus encoder

["Ian S. Piper" <ian@dieboldes.com>]

Can we just drop support for field upgrading old supervisor cards with the
Spyrus and if any Supervisor cards need upgrading, send them into the
McKinney depot?

Or will removing that routine in the Spyrus just mean that something else
will come up in its place when the user uses one of these cards?

Ian

-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com]On Behalf Of
Ken Clark
Sent: Tuesday, August 13, 2002 1:15 PM
To: support@dieboldes.com
Subject: RE: Voter Access Cards/Spyrus encoder



You are correct this was an issue that came up in the past, but as you
point out you are running 1.1.3, and I have not heard of the problem
before with this release.  The problem is that the old-format manager
cards can be easily misinterpreted by both the ballot station and voter
card encoder.

The problem won't be with the Spyrus units themselves, so don't worry
about the serial numbers in this case.  You could send me the cards, but
if I look at them I am sure I'll just see what you see.  Best thing you
can do at this point is "monitor the situation" and see if you can find
any pattern as to what is happening.  Previously the problem was that
"virgin cards" right out of the factory were misinterpreted as
old-format manager cards.  Does it happen with all cards you got from
"Atlanta warehouse", or just some of them?

What I would really like to do is just drop support for the old cards so
this can never happen, but there are so many of the old cards in
circulation.  I think we need to consider doing this, even if it causes
some discomfort to users who have not already upgraded their manager
cards in the field.  (They would have to order new supervisor cards from
McKinney).

Ken


-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com] On Behalf
Of Don Vopalensky
Sent: Thursday, August 08, 2002 2:07 PM
To: support@dieboldes.com
Subject: FW: Voter Access Cards/Spyrus encoder


Has anyone else experienced when trying to create a voter access card,
the
message Upgrade Supervisor Card appears.  This was an issue in the past
but
thought it was resolved.  The encoder was programmed with 1.1.3, and the
two
voter access cards this was experienced with has the numbers of
DESI642-1123
VCG SU004Kc0/T=OB on the back. I believe these voter access cards are
from a
new batch of cards that we received in the Atlanta warehouse.  I
experienced
this message when testing these two voter access cards with every Spyrus
that I could get me hands on with 1.1.3 loaded.  Unfortunately, I do not
have any serial numbers of the Spyrus encoders that I confirmed this
bug.  I
have the two voter access cards in my possession should I need to send
them
for additional testing.