Lesley,
There are no messages like the
ones you have listed.
Tab
----- Original Message -----
Sent: Thursday, July 18, 2002 7:57
AM
Subject: Fw: AVTS error message questions
BS 4.1.11
Can anyone help me with the error messages shown below in
bold red??? Thanks. Lesley
----- Original Message -----
I have not seen those error messages before. Send
those out to the support list for help. Jeff > >
-----Original Message----- > From: Lesley Thompson
[mailto:lesleytdiebold@earthlink.net] > Sent: Wednesday, July 17, 2002
4:48 PM > To: Jeff Hintz > > ok, let me ask you about
these other error message on the AVTS: >
> -File Archiver.cpp Load over > > -Archive not
enough space Load over > > -Corrupt File >
> What causes these and what should be done about them?
Thanks. > > Lesley > > >
----- Original Message ----- > From: "Jeff Hintz" <jeffhintz@dieboldes.com> > To: "Lesley
Thompson" <lesley@dieboldes.com> > Sent:
Wednesday, July 17, 2002 3:16 PM > Subject: RE: "invalid backup
election.brs" error message questions BS 4.1.11 > > > The
AVTS unit automatically does a backup of the election and all election >
files, including the election.brs file. If you download a new card
and > that cards ID's match one of the backed up election files on
the AVTS unit, > then when you insert in the new card there is a
conflict with the backed up > file and the files on the new card,
causing the "invalid backup election.brs" > > error message. >
> > > Jeff > > > > -----Original
Message----- > > From: Lesley Thompson
[mailto:lesley@dieboldes.com] > > Sent: Wednesday, July 10, 2002 7:15
PM > > To: jhglobal@earthlink.net> > Subject:
Fw: "invalid backup election.brs" error message questions BS > >
4.1.11 > > > > > > > > > Hello
Jeff, > > > Can you tell me what the cause of the BallotStation
error message > > > "invalid backup election.brs" means and/or is
caused by? > > > Thanks. > > Lesley > >
> > > > ----- Original Message ----- > > > From:
"Schmidt, Connie, ELC" <Connie.Schmidt@jocoks.com> > > >
To: <lesley@dieboldes.com> > > >
Sent: Monday, July 01, 2002 5:03 PM > > > Subject: FW: Questions
BS 4.1.11 > > > > > > > > > > for your
information. > > > > > > > > Connie > >
> > > > > > -----Original Message----- > > >
> From: Horn, Sarah, ELC > > > > > > > > The
error message "invalid backup election.brs" pre-dates version BS > >
> 4.1.11. > > > > In addition to Debbie's discovery of it
during acceptance testing, we > > saw > > > it >
> > > several times prior to the April election when we were
re-setting > > machines > > > > during training. Our
theory then was that it occurred when we had > > removed > >
> a > > > > PC card from one TouchScreen machine and put it
into a different one. > > > Today > > > > Stuart
and Kris received the message repeatedly, on multiple > >
TouchScreens. > > > > when re-setting cards for
training. > > > > > > Lesley: > > > I dug
around in my e-mails to find this communication with Jeff from > >
> November. The very first shipment of 150 machines that we received
on > > > November 1, 2001, we received that "Invalid backup
election.brs. Okay to > > > restore from main file?"
message. No mention of it was made in > following > >
> e-mails or phone conversations. I am interested to know what you
find > > out. > > > Thanks. > > > >
> > Debbie Tyrrel > > > > > > > -----Original
Message----- > > > > From: Lesley Thompson
[mailto:lesley@dieboldes.com] > > > > > > >
Debbie, > > > > To follow up on our phone call: > >
> In Windows CE 2.0, changes to these settings must be "flushed" to
make > > them > > > > permanent. > > >
> The flush.exe program is found in the ffx directory which is either
in > > the > > > > control panel or windows
directory. > > > > To get to the "My Computer" desktop go into
the install process by > > placing > > > > the upgrade
install pcmcia card in bottom slot. > > > > Once changes are
set, will need to keep these units segregated or > > "flush" >
> > > all units and replace IP address. > > >
> > > > > It is suggested that we move you to Windows CE
3.0, especially on the > > > units > > > > to be
used in the upload process. > > > > Windows CE 3.0 allows for
automatic IP addressing using dhcp (direct > > host > > >
> control protocol). > > > > The GEMS server will also need
to be set up as a dhcp server. > > > > The dhc protocol will
allow you to use any units as upload units > because > > >
of > > > > the automatic recognition of the IP
addressing. > > > > We do have a letter from ITA approving the
use of winCE 3.0 operation > > > system > > > > on
the AVTS Ballot Stations and I will have a copy faxed to you. > >
> > Let me know if you are interested in upgrading to the windows CE
3.0 > > > > operating system and I will submit the
order. > > > > Please note that the next Ballot Station upgrade
series will require > > > windows > > > > CE 3.0
operating system. > > > > If you only upgrade the operating
system on the units to be used for > > > result > > >
> uploads, will want to keep these units segregated. > > >
> > > > > FYI: currently Georgia is using WinCE 3.0 and BS
4.1.11 and will be > > moving > > > > to BS 4.3.x
after November. > > > > > > > > I am following
up on the BS 4.1.11 error message re. invalid backup > > > >
election. > > > > > > > > Lesley > >
> > > > > ----- Original Message ----- > > >
> From: "Tyrrel, Debbie, ELC" <Debbie.Tyrrel@jocoks.com> > >
> > > > > > Lesley: > > > > > We are
finding during our mock election to test election night > > >
procedures > > > > > that the new version of the firmware on
the TS units does not save > the > > > > > Network
card setting. Any time that the Network card is >
accidentally > > > > > ejected with the election PC card,
the Network card setting has to > be > > > > >
reentered. Jeff had told Kris that the setting was saved on the >
> Network > > > > > card, but that apparently is not the
case and it is not being saved > in > > > the > >
> > > unit either. Is there any way around this problem?
Debbie > > > > > > > > > >
|