[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: Spyrus Battery Power Consumption



Ian: Would you recommend that the pollworker turn the unit off after each voter card is programmed? What do you see as the best election day procedure for pollworkers?
Don
Donald W. Biszmaier
Support Services Specialist
Diebold Election Systems, Inc.
7717 Greenwood Rd.
Louisville, Ky. 40258
Office 502-244-8645
Cell 502-314-6936
Fax 502-254-7835
----- Original Message -----
Sent: Friday, July 12, 2002 6:16 PM
Subject: Spyrus Battery Power Consumption

 
I finally have some info from Spyrus on the consumption of battery power. 
Sitting on the Shelf   
The Spyrus units lose battery power just sitting on the shelf.  After installing a fresh set of batteries, it would take approx. one year before they died.
 
Operation Scenario
    
On a fresh set of batteries, and based on the operation model noted below, the Spyrus can program approx. 1300 smart cards before needing another fresh set of batteries.
 
   Operation model:  Assumed each operation takes 2 minutes, and during the two minutes operation, the smart card is powered on for 20 seconds.
    During the 2 minutes operation, the PAR2 is running at full power for 30 seconds, and low power for 90 seconds. When the PAR2 is
    waiting for a key input, or processing a command from the Diebold application, it would be running in the low power mode
 
As an example, taking both power consumption factors into account, a Spyrus unit never used after fresh batteries were installed and sitting on a shelf for 6 months would have 50% battery power left.  It would therefore be able to program approx. 650 smart cards (half of the 1300.)
 
Sincerely:
 
Ian S. Piper
Diebold Election Systems, Inc.
972.542.6000