I have done that very thing with all of the AVOS users when configuring
their modems. Mark
Earley 850 422-2100 - office/fax 850 322-3226 - cell -----Original
Message----- Would it be
appropriate to send this to our GEMS users and have them place this on their
desktop somewhere? -----
Original Message -----
To: support@gesn.com Sent: Thursday, June 13, 2002
2:17 PM Subject: RE:
Puerto Rico - Modems Hanging after first data transfer Attached is a text document
that makes it easy to reset all of the modem settings via HyperTerminal. At one point, I also played
around with setting S19=01 (I am working off of memory on the S19 part), which
had the effect of automatically resetting the modem after one minute. This
might possibly help. Dips 3 and 8 down. Mark
Earley 850
422-2100 - office/fax 850
322-3226 - cell -----Original Message----- have
him look at the modem settings in HyperTerminal and check his dip switches -----
Original Message ----- To: Support Team Sent: Thursday, June 13, 2002
2:38 PM Subject: Puerto
Rico - Modems Hanging after first data transfer Juan is
out in Puerto Rico and has done an initial test of modem transfer of
AccuVote-OS to the GEMS host computer, which has an 8 port Digi box and 8
modems. The version of GEMS is 1.19.1.3 and the AccuVote-OS firmware
is 1.96.3. The phone system is setup with 1 number that has roll-over. The
initial 8 uploads work without any problem. However, when trying to do
any more uploads after the initial 8, the AccuVote-OS units continue to
re-dial, because the modems still have the red light on for Carrier Detect
and are locked up, even though they have turned off the AccuVote-OS
units. The only way that Juan can continue to do uploads is by watching
the modems for the first initial upload and then turn off the modem
so it can be reset. I have
tried a test here in the Omaha office, and I have no problem with the modem
being reset after I turn off the AccuVote-OS unit. However, I am
connecting directly through COM1 on the computer, not a Digi box. I am
only connecting 1 AccuVote-OS at a time, and I do not have a roll-over number. In the
last election in Puerto Rico, back in February, we had no problems with
this. However, we were using a different computer, a different Digi box,
different modems, a different version of GEMS, and different firmware in the
AccuVote-OS. Does
anyone have any ideas??? Thanks, Jeff Hintz |