RE: Central Count

["Mike Brown" <mike@gesn.com>]

The "ppp session, open error -2" error message they are receiving has to do
with the port remaining open.  Press the "Yes" button and you will get
"logging in to service provider login error, attempt to connect? "Press
Yes" ->connecting to network.  It should log in at this point.  Ras should
reset the port after a delay loop.  I have noticed this error before.  I
will try and find the time to fix it.

Mike



Mike Brown
1611 Wilmeth Road
McKinney, TX 75069-8250
972.542.6000
800.433.8683

-----Original Message-----
From: Tari Runyan [mailto:tprunyan@techline.com]
Sent: Monday, March 13, 2000 1:08 PM
To: Mike Brown
Subject: Fw: Central Count

Mike anything you can offer to mark at this point??
Tari
-----Original Message-----
From: Mark DeMinico <Mdemini@co.santa-barbara.ca.us>
To: tprunyan@techline.com <tprunyan@techline.com>
Date: Monday, March 13, 2000 11:06 AM
Subject: Re: Central Count


>     Yes we are using the CC units.
>
>
>     We did this proc when we started, but will try it again to try and get
more units up.  Is there anything with the digi boxes that could affect
this?  Can/should they be powered off/on when the system is down, or would
this cause them to loose any settings they might have?
>
>
>   If you have anyone you can escalate this problem to, please do so.
>
>>>> "Tari Runyan" <tprunyan@techline.com> 03/13 10:37 AM >>>
>you are using the CC units aren't you ?  If so take the whole system down -
>then start central count and then bring the AccuVotes up -- you have to
>select the Vote center you want to count first - then start -  then turn on
>the units and let them log in
>Tari
>-----Original Message-----
>From: Mark DeMinico <ulcf1 Mdemini@co.santa-barbara.ca.us>
>To: ulcf1 Trglobal@earthlink.net <ulcf1 Trglobal@earthlink.net>
>Cc: Billie Alvarez <ulcf1 Balvare@co.santa-barbara.ca.us>; Bob Smith
><ulcf1 Bsmith@co.santa-barbara.ca.us>; Mark DeMinico
><ulcf1 Mdemini@co.santa-barbara.ca.us>; Renee Bischof
><ulcf1 Rbischo@co.santa-barbara.ca.us>
>Date: Monday, March 13, 2000 9:13 AM
>Subject: Central Count
>
>
>>Hi Tari,
>>
>>     We are in the process of getting all of our AV ballots counted for
our
>first public update, as requested by Ken.  We have been have problems
>getting all thre central count units up and working.
>>
>>
>>I spoke with Robert Chen on Friday regarding this, we had 2-3 of 6 up
then.
>He said he thought that there may be a problem shielding and the extended
>cables we have.  He said he would probably order new cables for us and
>discuss the problem with other staff.
>>
>>
>>This morning when we tried to get things going, ONLY ONE unit will link up
>with the system.  Friday I took two accuvotes in thre computer rooom and
>hooked them up minus the long extension cable and still got an error msg.
>>
>>W ae getting these msgs:
>>
>>Port 25 gets the following msg's:
>>
>>     logging in to service privider
>>     connecting to network
>>     ppp session, open error -2
>>
>>     It then loops back to the first msg.
>>
>>Ports 27 - 29 gets the following msg's:
>>
>>     logging in to service privider
>>     login error, attempt to connect?
>>     connecting to network
>>     ppp session, open error -2
>>
>>     then loops back to first line
>>
>>
>>     I just let a voice msg for Robert, but don't know if he is in today.
>Any suggestion on the problem or know who we can contact???
>>
>>
>>
>
>