|
FYI The oval
card was the old Solaick French design Microprocessor card we got from I-Mark Days
they are no longer made The L
shape card is the new Microprocessor Card made to act like the old Solaick
French design card by Card Logics in California. The other
two are identical 1K memory cards that Card logics made for us, it is just a
different chip manufacturer that card logic chose but functionally they are
identical Juan A. Rivera -----Original Message----- I just finished doing a small test here in
the Omaha office, and here is what I produced. I ran the CPM program to
be able to produce Manager Cards. Using a tabletop model - Rev. B, and
Voter Card.dll - Version 3-12-6-1, I was successful in programming the 4
different types of cards that I have. The oval chip card, a square chip
card with an X shape, a square chip card with the word ATMEL at the bottom, and
a square chip card in the L shape. Those are the exact cards I had in
Barrie, and I was only successful with the square chip card in the L
shape. However, I did not have the CPM program installed on any
equipment, there in Barrie. I don't know if that helps or not, but just
thought I would try the test here in Omaha. -----Original Message----- Global McKinney had never shipped Manager
Cards to Barrie, ON, prior to Jeff Hintz's arrival there last week. I don't
know where the ones Jeff mentioned came from. The current revisions of the External
Smart Card Reader are A, B, C, and D. If Global Vancouver already has
some external card readers there, perhaps they could tell me what revisions
they have and I could ship the revisions they don't have. I can provide samples of various versions
of smart cards used by Global over the centuries. I'll send Bonnie some
info so she can create a work order for these parts. Ian -----Original Message----- The City of Barrie had 2 Manager cards
there with the Gems system. A 1K card, (the old oval chip card), and a
64KB card, (the square chip card with a L shape). I don't know if these
cards were left from the first election that was done with the old I-Mark
system, or if left from demostrations after that. Yes the 1K Manager cards work on my
table top reader here in Omaha. But I have a table top model
that is Rev. B, and the table tope models sent to Barrie were Rev. D. Also, you might want Ian to send you all
the different Smart Cards & Smart Card Readers that they currently have in
McKinney, and make sure all are working. -----Original Message----- Jeff, Two questions: 1)
Since Ian states they have never send 1K Manager cards where did the 1K manager
cards come from? 2)
Do the 1K Manager cards work on other readers? If they do then I would
like to get a the 1K manager card and a new reader so we can determine what the
problem is and get it fixed. Tab -----
Original Message -----
Sent: Wednesday, August 23,
2000 3:21 PM Subject: Smart
Cards & New Table Top Card Readers I am
doing training here in the City of Barrie, Canada, and I have encountered with
the new table top card readers sent here, that they cannot read some of the
different smart cards that we have. So far I have only been able to get
the square smart card with the shape of an L able to read. Once
I am able to get into the Poll Book software with this card, I can create voter
cards with any of the other cards that I have, and they work fine in the AVTS
units. Is there anyone else that has encountered these problems??? Jeff
Hintz Global
Election Systems |